Main Factors Affecting the Performance of Insulating Materials

1, insulation resistance and resistivity
The resistance is the reciprocal of the conductance, and the resistivity is the resistance per unit volume. The smaller the conductivity of the material, the greater the resistance, the reciprocal relationship between the two, for the insulation material, always want the resistivity as high as possible.
2, the relative dielectric constant and dielectric loss tangent
polyimide film tape uses two: electrical network components of the mutual insulation and capacitor media (energy storage). The former requires a relatively small relative dielectric constant, which requires a relatively large relative dielectric constant, and both require dielectric loss tangent, especially in high frequency and high voltage applications of insulating materials, in order to make dielectric loss is small, are required to use Dielectric loss tangent small insulation material.
3, breakdown voltage and electrical strength
In a strong electric field under the destruction of insulating materials, loss of insulation into a conductive state, known as the breakdown. The breakdown voltage is called the breakdown voltage (dielectric strength). Electrical strength is the breakdown of the voltage between the voltage and the two electrodes that withstand the external voltage under the specified conditions, that is, the breakdown voltage per unit thickness. For insulating materials, the general breakdown voltage, electrical strength of the value of the higher the better.
4, tensile strength
Is the maximum tensile stress that the specimen is subjected to in the tensile test. It is the most widely used and tested test of the mechanical properties of insulating materials.
5, resistance to burning
Refers to the ability of the vulcanized fiber to prevent continued combustion when it is in contact with the flame. With the increasing use of insulating materials, its flammability requirements are more important, people through various means to improve and improve the flame resistance of insulating materials. The higher the flame resistance, the better the safety.
6, resistant to arc
Under the specified test conditions, the insulating material is resistant to the arc acting along its surface. Test the use of high voltage AC current, by high pressure between the two electrodes generated by the arc, so that the surface of the insulating material to form the conductive layer of the time required to determine the arc resistance of insulating materials. The greater the time value, the better the arc resistance.
7, the degree of sealing
On the oil, water quality isolation is better.